履带车辆转向过程循环功率分析

针对差速式、独立式2类转向机构,分别给出了不计和计及履带接地段打滑条件下最大循环功率及相应的相对转向半径的计算方法,定量讨论了不计和计及履带接地段打滑时循环功率的差别。在示例给定的计算条件下计算结果表明,计及履带接地段打滑时循环功率较不计打滑时小约20％。实车试验结果证实:考虑履带接地段打滑计算的循环功率同实际值更接近,在分析循环功率时不能忽略履带接地段的打滑。     

关于U算子有界性的证明

利用Hardy Littlewood极大算子及性质与分数次极大算子及性质 ,证明了u(x)在Lq(Rn) ,L∝ ,Lq(E)空间上是有界的 ,Coσoπeβ定理应予以推广。     

Iterative coloring extension of a maximum clique

In this paper we present an improved branch and bound algorithm for the vertex coloring problem. The idea is to try to extend the coloring of a maximum clique to its adjacent vertices. If this succeeds, its successive neighbors are considered; in case of failure (i.e., in the case the initial colors are not sufficient), working on the subgraph induced by the maximum clique and its neighborhood, the lower bound is improved by seeking for an optimal coloring of this subgraph by branch and bound. The process is repeated iteratively until the whole graph is examined. The iterative scheme exploits a further lower bound obtained by integrating a simple algorithm into the maximum clique search, and a new method to compute upper bounds on subgraphs. Furthermore, a new branching rule and a method for the selection of the initial maximum clique are presented. Extensive computational results and comparisons with existing exact coloring algorithms on random graphs and benchmarks are given. © 2001 John Wiley & Sons, Inc. Naval Research Logistic 48: 518–550, 2001     

坦克火控首发命中率试验脱靶弹数据处理方法

通过对出现脱靶弹情况下的散布特征参数估计方法的研究 ,建立了正态双边截尾样本均值和方差估计数学模型 ,并给出了数值计算方法 ,为坦克火控系统首发命中概率试验脱靶弹数据处理提供了理论依据。     

On lifetimes in random environments

For a component operating in random environment, whose hazard rate is assumed to be the realization of a suitable increasing stochastic process, conditions are found such that its lifetime is increasing in likelihood ratio (ILR). For the lifetimes of two components of the same kind some comparisons based on partial stochastic orders are presented. Some applications to the case of repairable components are finally provided. © 1998 John Wiley & Sons, Inc. Naval Research Logistics 45: 365–375, 1998     

Single machine sequencing with linear models of release dates

The paper deals with a problem of scheduling a set of jobs on a single machine. Before a job is released for processing, it must undergo some preprocessing treatment that consumes resources. It is assumed that the release date of a job is a linear decreasing continuous function of the amount of a locally and globally constrained, continuously divisible resource (e.g., energy, catalyzer, financial outlay, gas). The problem is to find a sequence of jobs and a resource allocation that will minimize the maximum job completion time. Such a problem appears, for example, in the ingot preheating and hot-rolling process in steel mills. It is shown that the problem is strongly NP-hard. Some polynomially solvable cases of the problem and approximate algorithms with both experimental and worst-case analysis are presented. © 1998 John Wiley & Sons, Inc. Naval Research Logistics 45: 99–113, 1998     

三种语音特征信息综合方法的理论分析

本文是作者在１９９７ 年 《声学学报》中文版和英文版发表的三篇文章基础上的进一步研究。这些文章没有对提出的三种语音特征综合方法进行理论分析, 本文运用概率论知识, 详细地对前面三篇文章提出的三种语音特征信息综合方法进行理论分析。分析结果表明： 三种语音特征信息综合方法能够比较好地综合语音特征信息, 提高语音识别系统的性能。这一结果与前面三篇文章中实验结果一致。     

初始误差和制导工具误差估计的非线性方法

准确估计初始误差和制导工具误差是机动发射飞行器精度鉴定必须解决的重要问题之一,提出了一种基于非线性模型的误差估计新方法。给出了平台初始失准角向定向误差的转换方法,采用不动点迭代法实现真实视加速度的精确计算,将真实发射系的轨道参数表示为初始误差和工具误差的非线性函数,结合外测数据建立了同时估计初始误差、工具误差、外测系统误差、遥外测时间零点偏差的非线性模型,避免了初始误差的线性化近似。给出了Bayes极大后验估计方法,利用非线性模型和先验信息获得误差的最优估计,证明了估计方法的收敛性。仿真结果表明,所提方法提高了初始误差和工具误差的估计精度,并实现了测量数据的自校准。     

球形译码算法中不均匀半径分配方案及性能分析

在球形译码算法中,初始半径的选择与分配是影响算法性能与复杂度的重要因素.针对球形译码算法在低信噪比时复杂度高的问题,提出了一种新的基于V-BLAST信号模型的初始半径选择与(准)线性半径分配方案,并分析了应用该方案的两种典型球形译码算法流程的性能与复杂度,其分析方法适用于任意不均匀半径分配方案.分析与仿真表明,与传统的球形译码算法相比,在信噪比较低时,采用该方案的球形译码算法的复杂度显著降低;在较宽信噪比范围内,其误码率性能接近最大似然检测性能.     

LDPC编码跳频通信系统中的迭代抗干扰抑制算法研究

文中讨论 LDPC 码在抗干扰跳频通信中的应用问题。在接收机几乎没有任何信道先验知识(包括信噪比/信干扰比,部分频带干扰信息等)的假设下,推导了一种新的鲁棒检测算法。该鲁棒检测算法与最小和迭代解码算法结合可成功用于 LDPC 码的有效接收,性能逼近理想不可实现条件下的最佳检测算法。